Jorc Drains

EAD

The EAD has been designed for general-purpose applications. It is a mass produced, no options drain, though still incorporating the flexibility to be widely applied and has quality benefits over competitor products such as a large discharge orifice and FPM seals for systems where synthetic lubricants are used.

TEC 44

The TEC-44 will successfully remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The TEC 44 is designed to remove high viscosity effluents at pressure ratings up 720 psi The TEC-44 features microprocessor technology, a 10 channel programmable cycle with LCD, valve open LED, push to test button, anti-blockage system, and a battery back-up for protection against power failure.

Combo Integrated Strainer/Ball Valve Drain Assembly - 300 psi

The COMBO is unique in the fact that the solenoid valve has an integrated ball valve strainer. The COMBO offers all the advantages of a timer controlled drain and in addition has the protection of a mesh strainer, preventing large particles from blocking the valve orifice.

The unit can be shut off from the compressed air system enabling safe maintenance work to be carried out.

Combo D-Lux Integrated Strainer/Ball Valve Drain Assembly - 300 psi

The Combo D-Lux is an all in one digital timer drain with an integrated ball valve and strainer. The unit offers true digital time cycle programming convenience. The valve reduces installation time and protects against large particles found in condensate. The unit can be shut off from the compressed air system enabling easy and safe maintenance work to be carried out. The COMBO-D-LUX reduces installation time, and eliminates various other components.

Optimum Timer Controlled Condensate Drain - 230 psi

The Optimum Drain Assembly consists of a solid-state timer coupled to a solenoid valve. Instruction manual outlines installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

Optimum High Pressure Timer Controlled Condensate Drain - up to 6000 psi

The Optimum High Pressure Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system. Available from 600 psi through 6000 psi.

Optimum-Stainless Steel Timer Controlled Condensate Drain - 230 to 6000 psi

The Optimum-S Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system requiring stainless steel valves.

TEC-11 Timer Controlled Condensate Drain - 230 to 300 psi

The TEC-11 unit consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is designed exclusively for ALL compressed air filters, regardless of their capacity or size.

Fill out the Request for Quote form below, and a representative will be back to you shortly.

Note: Fields marked with an asterisk are required.